Cera-Wear HR Ceramic Wear Pads are premium composite ceramic liners designed for abrasion and impact protection in severe industrial wear environments.
Their alumina ceramic tiles are vulcanised into a flexible rubber matrix with a CN bonding layer for strong wear resistance and reliable bonded installation.
Available in standard panel sizes and custom liner formats for chutes, tanks, feeders, cyclones, launders, and transfer systems.
Description
Cera-Wear HR Ceramic Wear Pads are premium-grade composite ceramic liners engineered for abrasion and impact protection in demanding industrial environments.
Manufactured from 92% alumina ceramic tiles embedded within a rubber matrix, these wear pads provide excellent resistance to high-velocity wet slurry, fine particle sliding abrasion,
and impact in severe process applications.
The liners feature interlocking hexagonal ceramic tiles fully vulcanised within a premium 40 Duro rubber compound, delivering a combination of wear resistance, impact absorption, and
installation flexibility across flat and curved surfaces.
SEC Business Group supplies advanced ceramic wear protection systems designed to protect steel equipment, reduce downtime, and extend service life in abrasive operating conditions.
Cera-Wear HR Ceramic Wear Pads are ideal for applications where high wear resistance, reliable bonding, and flexible ceramic liner installation are required in both dry and wet process systems.
Cera-Wear HR Ceramic Wear Pads are designed primarily for use
as a wear protection ceramic lining system for industrial applications.
These ceramic liners are bonded to industrial equipment to protect
steel surfaces from abrasion and impact.
Typical applications include:
These ceramic wear pads are also used extensively throughout
the agriculture industry on grain handling, processing,
and storage equipment.
| Property | Value | Standard |
|---|---|---|
| Alumina Content | 92% (min) | |
| Density | 3.65 g/cm³ | ASTM C373-88 |
| Hardness (Rockwell) | 77 R45N | ASTM C1327 |
| Compressive Strength | 1950 MPa (min) | ASTM C1424-04 |
| Flexural Strength | 320 MPa (min) | ASTM C1161-02c |
| Water Absorption | 0% | ASTM C373-88 |
| Abrasion by Impingement | 0.05 grams (max) | |
| Abrasion by Rubbing | 0.1 grams (max) |
| Property | Value | Standard |
|---|---|---|
| Polymer | SBR | |
| Colour | Black | |
| Hardness | 40° ± 5° Shore A | ASTM D2240 |
Cera-Wear HR Ceramic Wear Pads are supplied in a range of standard thicknesses and panel sizes. They can also be supplied as a custom-made bolt-in ceramic wear liner system to suit
industrial equipment and application requirements.
| Part Number | Description | Weight (Each) |
|---|---|---|
| CWP10/0604HR | Cera-Wear HR Ceramic Wear Pad with CN B/L 10mm x 500mm x 500mm (Hex pattern 6mm thick x 20mm A/F tiles on 4mm rubber with rubber between tiles) |
6.4 kgs |
| CWP20/1208HR | Cera-Wear HR Ceramic Wear Pad with CN B/L 20mm x 500mm x 500mm (Hex pattern 12mm thick x 20mm A/F tiles on 8mm rubber with rubber between tiles) |
12 kgs |
| CWP30/2505HR | Cera-Wear HR Ceramic Wear Pad with CN B/L 30mm x 500mm x 500mm (Hex pattern 12mm thick x 25mm A/F tiles on 5mm rubber with rubber between tiles) |
21.6 kgs |
| CWP30/2505HR250 | Cera-Wear HR Ceramic Wear Pad with CN B/L 30mm x 250mm x 500mm (Hex pattern 12mm thick x 25mm A/F tiles on 5mm rubber with rubber between tiles) |
10.8 kgs |
Technical drawings available on request.
Cera-Wear HR Ceramic Wear Pads can be supplied as:
This product is manufactured by Reglin and supplied by SEC Business Group.
For liner selection, technical advice, or custom fabrication, contact SEC Business Group.