Cera-Wear Ceramic Wear Pads are premium composite ceramic liners designed for severe abrasion protection in industrial environments.
Their full ceramic wear face removes gaps between tiles, helping prevent fine particle wear paths while maintaining moderate impact resistance.
Available in standard panel sizes and custom liner formats for chutes, tanks, feeders, cyclones, launders, and transfer systems.
Description
Cera-Wear Ceramic Wear Pads are premium-grade composite ceramic liners engineered for severe abrasion protection in demanding industrial applications.
Manufactured from wear-resistant 92% alumina ceramic tiles vulcanised to a rubber backing, these liners provide excellent resistance to high-velocity wet slurry, fine particle sliding
abrasion, and impact in aggressive wear environments.
Their tile arrangement creates a full ceramic wear surface, delivering outstanding protection where fine particle wear must be minimised and long service life is essential.
SEC Business Group supplies advanced ceramic wear protection systems designed to protect steel equipment, reduce downtime, and extend service life in abrasive process applications.
Cera-Wear Ceramic Wear Pads are ideal for applications where a continuous ceramic surface is required to eliminate fine particle wear between tiles while maintaining moderate impact
resistance and installation flexibility.
Cera-Wear Ceramic Wear Pads are designed primarily for use as a wear protection ceramic lining system for industrial applications.
These ceramic liners are bonded to industrial equipment to protect steel surfaces from abrasion and impact.
Typical applications include:
These ceramic wear pads are also used extensively throughout the agriculture industry on grain handling, processing, and storage equipment.
| Property | Value | Standard |
|---|---|---|
| Alumina Content | 92% (min) | |
| Density | 3.65 g/cm³ | ASTM C373-88 |
| Hardness (Rockwell) | 77 R45N | ASTM C1327 |
| Compressive Strength | 1950 MPa (min) | ASTM C1424-04 |
| Flexural Strength | 320 MPa (min) | ASTM C1161-02c |
| Water Absorption | 0% | ASTM C373-88 |
| Abrasion by Impingement | 0.05 grams (max) | |
| Abrasion by Rubbing | 0.1 grams (max) |
| Property | Value | Standard |
|---|---|---|
| Polymer | SBR | |
| Colour | Black | |
| Hardness | 40° ± 5° Shore A | ASTM D2240 |
Cera-Wear Ceramic Wear Pads are supplied in 500mm x 500mm panels in a range of standard thicknesses. They can also be supplied as a custom made bolt-in ceramic wear liner system
to suit equipment and application requirements.
| Part Number | Description | Weight (Each) |
|---|---|---|
| CWP05/0302S | Cera-Wear Ceramic Wear Pad with CN B/L 5mm x 500mm x 500mm (Square pattern 3mm thick x 10mm A/F tiles on 2mm rubber with no rubber between) |
3.5 kgs |
| CWP08/0404S | Cera-Wear Ceramic Wear Pad with CN B/L 8mm x 500mm x 500mm (Square pattern 4mm thick x 20mm A/F tiles on 4mm rubber with no rubber between) |
5.1 kgs |
| CWP14/1004S | Cera-Wear Ceramic Wear Pad with CN B/L 14mm x 500mm x 500mm (Square pattern 10mm thick x 20mm A/F tiles on 4mm rubber with no rubber between) |
10.5 kgs |
| CWP20/1208H | Cera-Wear Ceramic Wear Pad with CN B/L 20mm x 500mm x 500mm (Hex pattern 12mm thick x 20mm A/F tiles on 8mm rubber with no rubber between) |
13.5 kgs |
Custom made steel-backed ceramic liners are also available for specialised bolt-in wear protection systems.
Cera-Wear Ceramic Wear Pads can be supplied as:
This product is manufactured by Reglin and supplied by SEC Business Group.
For liner selection, technical advice, or custom fabrication, contact SEC Business Group.